commit 0ab06468cbd149aac0d7f216ec00452ff8c74e0b Author: Greg Kroah-Hartman Date: Tue May 30 13:55:33 2023 +0100 Linux 5.15.114 Link: https://lore.kernel.org/r/20230528190828.358612414@linuxfoundation.org Tested-by: Bagas Sanjaya Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Tested-by: Ron Economos Tested-by: Chris Paterson (CIP) Signed-off-by: Greg Kroah-Hartman commit 193c59ba72999d325b7c0c68a0dad3757004130f Author: David Epping Date: Tue May 23 17:31:05 2023 +0200 net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE commit 57fb54ab9f6945e204740b696bd4cee61ee04e5e upstream. The mscc driver implements support for VSC8502, so its ID should be in the MODULE_DEVICE_TABLE for automatic loading. Signed-off-by: David Epping Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502") Reviewed-by: Vladimir Oltean Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 350b95e86ca9ca093c9f01a7b4eeb34f3bc3f49e Author: Christophe JAILLET Date: Sat May 20 11:48:55 2023 +0200 3c589_cs: Fix an error handling path in tc589_probe() commit 640bf95b2c7c2981fb471acdafbd3e0458f8390d upstream. Should tc589_config() fail, some resources need to be released as already done in the remove function. Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions") Signed-off-by: Christophe JAILLET Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 7c2fa3e56d95f6dba9cc705c8c815b530e2835a9 Author: Sen Chu Date: Thu May 18 12:06:46 2023 +0800 regulator: mt6359: add read check for PMIC MT6359 commit a511637502b1caa135046d0f8fdabd55a31af8ef upstream. Add hardware version read check for PMIC MT6359 Signed-off-by: Sen Chu commit 28ebfb74fbf513e0c7cd2674d8c2400ee0220d18 Author: Sudeep Holla Date: Wed May 3 14:12:52 2023 +0100 firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors commit 111a833dc5cbef3d05b2a796a7e23cb7f6ff2192 upstream. The transmit buffers allocated by the driver can be used to transmit data by any messages/commands needing the buffer. However, it is not guaranteed to have been zero-ed before every new transmission and hence it will just contain residual value from the previous transmission. There are several reserved fields in the memory descriptors that must be zero(MBZ). The receiver can reject the transmission if any such MBZ fields are non-zero. While we can set the whole page to zero, it is not optimal as most of the fields get initialised to the value required for the current transmission. So, just set the reserved/MBZ fields to zero in the memory descriptors explicitly to honour the requirement and keep the receiver happy. Fixes: cc2195fe536c ("firmware: arm_ffa: Add support for MEM_* interfaces") Reported-by: Marc Bonnici Link: https://lore.kernel.org/r/20230503131252.12585-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman commit 34b0985ebdfcdb7194368be6a1ac818736ba9c67 Author: Hugo Villeneuve Date: Mon May 1 13:05:32 2023 -0400 arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay commit f161cea5a20f3aeeb637a88ad1705fc2720b4d58 upstream. While testing the ethernet interface on a Variscite symphony carrier board using an imx8mn SOM with an onboard ADIN1300 PHY (EC hardware configuration), the ethernet PHY is not detected. The ADIN1300 datasheet indicate that the "Management interface active (t4)" state is reached at most 5ms after the reset signal is deasserted. The device tree in Variscite custom git repository uses the following property: phy-reset-post-delay = <20>; Add a new MDIO property 'reset-deassert-us' of 20ms to have the same delay inside the ethphy node. Adding this property fixes the problem with the PHY detection. Note that this SOM can also have an Atheros AR8033 PHY. In this case, a 1ms deassert delay is sufficient. Add a comment to that effect. Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module") Signed-off-by: Hugo Villeneuve Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman commit 1e755065368000205e6683fa924b2654e99f573b Author: Shay Drory Date: Tue May 2 13:35:11 2023 +0300 net/mlx5: Devcom, fix error flow in mlx5_devcom_register_device commit af87194352cad882d787d06fb7efa714acd95427 upstream. In case devcom allocation is failed, mlx5 is always freeing the priv. However, this priv might have been allocated by a different thread, and freeing it might lead to use-after-free bugs. Fix it by freeing the priv only in case it was allocated by the running thread. Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by: Shay Drory Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit a89a69cea44c159bfb1855936c547c7c33e6eb24 Author: Roi Dayan Date: Mon May 1 14:37:56 2023 +0300 net/mlx5: Fix error message when failing to allocate device memory commit a65735148e0328f80c0f72f9f8d2f609bfcf4aff upstream. Fix spacing for the error and also the correct error code pointer. Fixes: c9b9dcb430b3 ("net/mlx5: Move device memory management to mlx5_core") Signed-off-by: Roi Dayan Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit e8a974bbf4a5387ed7fd4e42f97e6e067a89b827 Author: Yevgeny Kliteynik Date: Sun Apr 2 17:14:10 2023 +0300 net/mlx5: DR, Check force-loopback RC QP capability independently from RoCE commit c7dd225bc224726c22db08e680bf787f60ebdee3 upstream. SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB (loopback), and FL (force-loopback) QP is preferred for performance. FL is available when RoCE is enabled or disabled based on RoCE caps. This patch adds reading of FL capability from HCA caps in addition to the existing reading from RoCE caps, thus fixing the case where we didn't have loopback enabled when RoCE was disabled. Fixes: 7304d603a57a ("net/mlx5: DR, Add support for force-loopback QP") Signed-off-by: Itamar Gozlan Signed-off-by: Yevgeny Kliteynik Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit 5e0cc0d502d42fb1eed6a4d39ef26b1257ac9908 Author: Erez Shitrit Date: Thu Mar 9 16:43:15 2023 +0200 net/mlx5: DR, Fix crc32 calculation to work on big-endian (BE) CPUs commit 1e5daf5565b61a96e570865091589afc9156e3d3 upstream. When calculating crc for hash index we use the function crc32 that calculates for little-endian (LE) arch. Then we convert it to network endianness using htonl(), but it's wrong to do the conversion in BE archs since the crc32 value is already LE. The solution is to switch the bytes from the crc result for all types of arc. Fixes: 40416d8ede65 ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib") Signed-off-by: Erez Shitrit Reviewed-by: Alex Vesker Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit 792a8233fc0124e6c7796a303e92336e2ff6b331 Author: Jakub Kicinski Date: Tue May 16 18:59:35 2023 -0700 net/mlx5e: do as little as possible in napi poll when budget is 0 commit afbed3f74830163f9559579dee382cac3cff82da upstream. NAPI gets called with budget of 0 from netpoll, which has interrupts disabled. We should try to free some space on Tx rings and nothing else. Specifically do not try to handle XDP TX or try to refill Rx buffers - we can't use the page pool from IRQ context. Don't check if IRQs moved, either, that makes no sense in netpoll. Netpoll calls _all_ the rings from whatever CPU it happens to be invoked on. In general do as little as possible, the work quickly adds up when there's tens of rings to poll. The immediate stack trace I was seeing is: __do_softirq+0xd1/0x2c0 __local_bh_enable_ip+0xc7/0x120 page_pool_put_defragged_page+0x267/0x320 mlx5e_free_xdpsq_desc+0x99/0xd0 mlx5e_poll_xdpsq_cq+0x138/0x3b0 mlx5e_napi_poll+0xc3/0x8b0 netpoll_poll_dev+0xce/0x150 AFAIU page pool takes a BH lock, releases it and since BH is now enabled tries to run softirqs. Reviewed-by: Tariq Toukan Fixes: 60bbf7eeef10 ("mlx5: use page_pool for xdp_return_frame call") Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit fdf8f33e7d0319ec64a1ca881ecfada4ac338412 Author: Dan Carpenter Date: Mon May 15 13:32:37 2023 +0300 platform/mellanox: mlxbf-pmc: fix sscanf() error checking commit 95e4b25192e9238fd2dbe85d96dd2f8fd1ce9d14 upstream. The sscanf() function never returns negatives. It returns the number of items successfully read. Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver") Signed-off-by: Dan Carpenter Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/4ccdfd28-099b-40bf-8d77-ad4ea2e76b93@kili.mountain Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman commit d5ab5447d91015b27a084418eec958771a2460b1 Author: Christophe JAILLET Date: Sat May 20 10:30:17 2023 +0200 forcedeth: Fix an error handling path in nv_probe() commit 5b17a4971d3b2a073f4078dd65331efbe35baa2d upstream. If an error occures after calling nv_mgmt_acquire_sema(), it should be undone with a corresponding nv_mgmt_release_sema() call. Add it in the error handling path of the probe as already done in the remove function. Fixes: cac1c52c3621 ("forcedeth: mgmt unit interface") Signed-off-by: Christophe JAILLET Acked-by: Zhu Yanjun Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ae7c4ec4265504bf5cb82299fe5f3492467e7ad7 Author: Xin Long Date: Thu May 18 16:03:00 2023 -0400 sctp: fix an issue that plpmtu can never go to complete state commit 6ca328e985cd995dfd1d5de44046e6074f853fbb upstream. When doing plpmtu probe, the probe size is growing every time when it receives the ACK during the Search state until the probe fails. When the failure occurs, pl.probe_high is set and it goes to the Complete state. However, if the link pmtu is huge, like 65535 in loopback_dev, the probe eventually keeps using SCTP_MAX_PLPMTU as the probe size and never fails. Because of that, pl.probe_high can not be set, and the plpmtu probe can never go to the Complete state. Fix it by setting pl.probe_high to SCTP_MAX_PLPMTU when the probe size grows to SCTP_MAX_PLPMTU in sctp_transport_pl_recv(). Also, not allow the probe size greater than SCTP_MAX_PLPMTU in the Complete state. Fixes: b87641aff9e7 ("sctp: do state transition when a probe succeeds on HB ACK recv path") Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit ee553694be4287f2bf5adc1e67185343e4d6f921 Author: Cezary Rojewski Date: Fri May 19 22:17:07 2023 +0200 ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg commit 95109657471311601b98e71f03d0244f48dc61bb upstream. Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is reserved for 'C7_1' instead. Fixes: 04afbbbb1cba ("ASoC: Intel: Skylake: Update the topology interface structure") Signed-off-by: Cezary Rojewski Signed-off-by: Amadeusz Sławiński Link: https://lore.kernel.org/r/20230519201711.4073845-4-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit aafa5019e2a383776522f031c07f87cc6dd9363d Author: Vernon Lovejoy Date: Fri May 12 12:42:32 2023 +0200 x86/show_trace_log_lvl: Ensure stack pointer is aligned, again commit 2e4be0d011f21593c6b316806779ba1eba2cd7e0 upstream. The commit e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned") tried to align the stack pointer in show_trace_log_lvl(), otherwise the "stack < stack_info.end" check can't guarantee that the last read does not go past the end of the stack. However, we have the same problem with the initial value of the stack pointer, it can also be unaligned. So without this patch this trivial kernel module #include static int init(void) { asm volatile("sub $0x4,%rsp"); dump_stack(); asm volatile("add $0x4,%rsp"); return -EAGAIN; } module_init(init); MODULE_LICENSE("GPL"); crashes the kernel. Fixes: e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned") Signed-off-by: Vernon Lovejoy Signed-off-by: Oleg Nesterov Link: https://lore.kernel.org/r/20230512104232.GA10227@redhat.com Signed-off-by: Josh Poimboeuf Signed-off-by: Greg Kroah-Hartman commit 90314394a16dc4d82a281e13d51bb1dbcb899d6a Author: Dan Carpenter Date: Wed May 3 18:11:35 2023 +0300 xen/pvcalls-back: fix double frees with pvcalls_new_active_socket() commit 8fafac202d18230bb9926bda48e563fd2cce2a4f upstream. In the pvcalls_new_active_socket() function, most error paths call pvcalls_back_release_active(fedata->dev, fedata, map) which calls sock_release() on "sock". The bug is that the caller also frees sock. Fix this by making every error path in pvcalls_new_active_socket() release the sock, and don't free it in the caller. Fixes: 5db4d286a8ef ("xen/pvcalls: implement connect command") Signed-off-by: Dan Carpenter Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/e5f98dc2-0305-491f-a860-71bbd1398a2f@kili.mountain Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman commit ff151810fb952865047bb5e596540a3a89df6cf5 Author: Dan Carpenter Date: Fri Apr 21 13:42:41 2023 +0300 coresight: Fix signedness bug in tmc_etr_buf_insert_barrier_packet() commit f67bc15e526bb9920683ad6c1891ff9e08981335 upstream. This code generates a Smatch warning: drivers/hwtracing/coresight/coresight-tmc-etr.c:947 tmc_etr_buf_insert_barrier_packet() error: uninitialized symbol 'bufp'. The problem is that if tmc_sg_table_get_data() returns -EINVAL, then when we test if "len < CORESIGHT_BARRIER_PKT_SIZE", the negative "len" value is type promoted to a high unsigned long value which is greater than CORESIGHT_BARRIER_PKT_SIZE. Fix this bug by adding an explicit check for error codes. Fixes: 75f4e3619fe2 ("coresight: tmc-etr: Add transparent buffer management") Signed-off-by: Dan Carpenter Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/7d33e244-d8b9-4c27-9653-883a13534b01@kili.mountain Signed-off-by: Greg Kroah-Hartman commit 24cf1147437691104441d97fa98da87b875f96d0 Author: Alexander Stein Date: Fri May 12 10:19:34 2023 +0200 regulator: pca9450: Fix BUCK2 enable_mask commit d67dada3e2524514b09496b9ee1df22d4507a280 upstream. This fixes a copy & paste error. No functional change intended, BUCK1_ENMODE_MASK equals BUCK2_ENMODE_MASK. Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver") Originally-from: Robin Gong commit cd41ec23503f83a761f961a32c7df2749771bae7 Author: Hao Ge Date: Mon Apr 24 13:18:35 2023 +0800 fs: fix undefined behavior in bit shift for SB_NOUSER commit f15afbd34d8fadbd375f1212e97837e32bc170cc upstream. Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. It was spotted by UBSAN. So let's just fix this by using the BIT() helper for all SB_* flags. Fixes: e462ec50cb5f ("VFS: Differentiate mount flags (MS_*) from internal superblock flags") Signed-off-by: Hao Ge Message-Id: <20230424051835.374204-1-gehao@kylinos.cn> [brauner@kernel.org: use BIT() for all SB_* flags] Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman commit c2f65991097a62efbdb2bed3c06fc86b08c9593b Author: Sudeep Holla Date: Thu Apr 20 16:06:03 2023 +0100 firmware: arm_ffa: Fix FFA device names for logical partitions commit 19b8766459c41c6f318f8a548cc1c66dffd18363 upstream. Each physical partition can provide multiple services each with UUID. Each such service can be presented as logical partition with a unique combination of VM ID and UUID. The number of distinct UUID in a system will be less than or equal to the number of logical partitions. However, currently it fails to register more than one logical partition or service within a physical partition as the device name contains only VM ID while both VM ID and UUID are maintained in the partition information. The kernel complains with the below message: | sysfs: cannot create duplicate filename '/devices/arm-ffa-8001' | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8 | Hardware name: FVP Base RevC (DT) | Call trace: | dump_backtrace+0xf8/0x118 | show_stack+0x18/0x24 | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | sysfs_create_dir_ns+0xe0/0x13c | kobject_add_internal+0x220/0x3d4 | kobject_add+0x94/0x100 | device_add+0x144/0x5d8 | device_register+0x20/0x30 | ffa_device_register+0x88/0xd8 | ffa_setup_partitions+0x108/0x1b8 | ffa_init+0x2ec/0x3a4 | do_one_initcall+0xcc/0x240 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x100/0x16c | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 | kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to | register things with the same name in the same directory. | arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17 | ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001 By virtue of being random enough to avoid collisions when generated in a distributed system, there is no way to compress UUID keys to the number of bits required to identify each. We can eliminate '-' in the name but it is not worth eliminating 4 bytes and add unnecessary logic for doing that. Also v1.0 doesn't provide the UUID of the partitions which makes it hard to use the same for the device name. So to keep it simple, let us alloc an ID using ida_alloc() and append the same to "arm-ffa" to make up a unique device name. Also stash the id value in ffa_dev to help freeing the ID later when the device is destroyed. Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Reported-by: Lucian Paul-Trifu Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-3-d9108e43a176@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman commit 6a26c62625c59b8dd7f52c518cb4f60a63470a0e Author: Sudeep Holla Date: Thu Apr 20 16:06:01 2023 +0100 firmware: arm_ffa: Check if ffa_driver remove is present before executing commit b71b55248a580e9c9befc4ae060539f1f8e477da upstream. Currently ffa_drv->remove() is called unconditionally from ffa_device_remove(). Since the driver registration doesn't check for it and allows it to be registered without .remove callback, we need to check for the presence of it before executing it from ffa_device_remove() to above a NULL pointer dereference like the one below: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000086000004 | EC = 0x21: IABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6 | Hardware name: FVP Base RevC (DT) | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c) | pc : 0x0 | lr : ffa_device_remove+0x20/0x2c | Call trace: | 0x0 | device_release_driver_internal+0x16c/0x260 | driver_detach+0x90/0xd0 | bus_remove_driver+0xdc/0x11c | driver_unregister+0x30/0x54 | ffa_driver_unregister+0x14/0x20 | cleanup_module+0x18/0xeec | __arm64_sys_delete_module+0x234/0x378 | invoke_syscall+0x40/0x108 | el0_svc_common+0xb4/0xf0 | do_el0_svc+0x30/0xa4 | el0_svc+0x2c/0x7c | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x190/0x194 Fixes: 244f5d597e1e ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type") Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-1-d9108e43a176@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman commit f64567bd95662f346d0cb9e1cf4d6cf791a2892c Author: Daisuke Nojiri Date: Mon Apr 24 11:25:58 2023 -0700 power: supply: sbs-charger: Fix INHIBITED bit for Status reg commit b2f2a3c9800208b0db2c2e34b05323757117faa2 upstream. CHARGE_INHIBITED bit position of the ChargerStatus register is actually 0 not 1. This patch corrects it. Fixes: feb583e37f8a8 ("power: supply: add sbs-charger driver") Signed-off-by: Daisuke Nojiri Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit 71a9f146b3dc44bf420b19208bab93d98487517b Author: Hans de Goede Date: Sat Apr 15 20:23:35 2023 +0200 power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status() commit 35092c5819f8c5acc7bafe3fdbb13d6307c4f5e1 upstream. Add a cache parameter to bq27xxx_battery_current_and_status() so that it can optionally use cached flags instead of re-reading them itself. This is a preparation patch for making bq27xxx_battery_update() check the status and have it call power_supply_changed() on status changes. Fixes: 297a533b3e62 ("bq27x00: Cache battery registers") Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit e98e5bebfcafc75a7b41192a607dfea5c1268afa Author: Hans de Goede Date: Sat Apr 15 20:23:34 2023 +0200 power: supply: bq27xxx: Fix poll_interval handling and races on remove commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream. Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0 to avoid bq27xxx_battery_update() requeuing the delayed_work item. There are 2 problems with this: 1. If the driver is unbound through sysfs, rather then the module being rmmod-ed, this changes poll_interval unexpectedly 2. This is racy, after it being set poll_interval could be changed before bq27xxx_battery_update() checks it through /sys/module/bq27xxx_battery/parameters/poll_interval Fix this by added a removed attribute to struct bq27xxx_device_info and using that instead of setting poll_interval to 0. There also is another poll_interval related race on remove(), writing /sys/module/bq27xxx_battery/parameters/poll_interval will requeue the delayed_work item for all devices on the bq27xxx_battery_devices list and the device being removed was only removed from that list after cancelling the delayed_work item. Fix this by moving the removal from the bq27xxx_battery_devices list to before cancelling the delayed_work item. Fixes: 8cfaaa811894 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver") Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit e01820a94aea99296e500f54b3f36a2985061045 Author: Hans de Goede Date: Sat Apr 15 20:23:33 2023 +0200 power: supply: bq27xxx: Fix I2C IRQ race on remove commit 444ff00734f3878cd54ddd1ed5e2e6dbea9326d5 upstream. devm_request_threaded_irq() requested IRQs are only free-ed after the driver's remove function has ran. So the IRQ could trigger and call bq27xxx_battery_update() after bq27xxx_battery_teardown() has already run. Switch to explicitly free-ing the IRQ in bq27xxx_battery_i2c_remove() to fix this. Fixes: 8807feb91b76 ("power: bq27xxx_battery: Add interrupt handling support") Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit d21b3448577feab33557dcae3d9794d37aa91b01 Author: Hans de Goede Date: Sat Apr 15 20:23:32 2023 +0200 power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition commit 5c34c0aef185dcd10881847b9ebf20046aa77cb4 upstream. bq27xxx_battery_update() assumes / requires that it is only run once, not multiple times at the same time. But there are 3 possible callers: 1. bq27xxx_battery_poll() delayed_work item handler 2. bq27xxx_battery_irq_handler_thread() I2C IRQ handler 3. bq27xxx_battery_setup() And there is no protection against these racing with each other, fix this race condition by making all callers take di->lock: - Rename bq27xxx_battery_update() to bq27xxx_battery_update_unlocked() - Add new bq27xxx_battery_update() which takes di->lock and then calls bq27xxx_battery_update_unlocked() - Make stale cache check code in bq27xxx_battery_get_property(), which already takes di->lock directly to check the jiffies, call bq27xxx_battery_update_unlocked() instead of messing with the delayed_work item - Make bq27xxx_battery_update_unlocked() mod the delayed-work item so that the next poll is delayed to poll_interval milliseconds after the last update independent of the source of the update Fixes: 740b755a3b34 ("bq27x00: Poll battery state") Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit c530f60e5a2e20b657c82f210780862c92bd10ae Author: Kang Chen Date: Mon Feb 27 11:14:10 2023 +0800 power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe commit 4cbb0d358883a27e432714b5256f0362946f5e25 upstream. devm_work_autocancel may fail, add a check and return early. Fixes: 0402e8ebb8b86 ("power: supply: mt6360_charger: add MT6360 charger support") Signed-off-by: Kang Chen Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit 0dd4881238bcc75e375a7ca15f25f6e087cf8f94 Author: Hans de Goede Date: Thu Apr 13 12:09:41 2023 +0200 power: supply: leds: Fix blink to LED on transition commit e4484643991e0f6b89060092563f0dbab9450cbb upstream. When a battery's status changes from charging to full then the charging-blink-full-solid trigger tries to change the LED from blinking to solid/on. As is documented in include/linux/leds.h to deactivate blinking / to make the LED solid a LED_OFF must be send: """ * Deactivate blinking again when the brightness is set to LED_OFF * via the brightness_set() callback. """ led_set_brighness() calls with a brightness value other then 0 / LED_OFF merely change the brightness of the LED in its on state while it is blinking. So power_supply_update_bat_leds() must first send a LED_OFF event before the LED_FULL to disable blinking. Fixes: 6501f728c56f ("power_supply: Add new LED trigger charging-blink-solid-full") Signed-off-by: Hans de Goede Reviewed-by: Vasily Khoruzhick Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit 5e4bb063dcaf796a2fc8024680003e9a6bb95184 Author: Steve French Date: Wed May 24 03:26:19 2023 -0500 cifs: mapchars mount option ignored commit cb8b02fd6343228966324528adf920bfb8b8e681 upstream. There are two ways that special characters (not allowed in some other operating systems like Windows, but allowed in POSIX) have been mapped in the past ("SFU" and "SFM" mappings) to allow them to be stored in a range reserved for special chars. The default for Linux has been to use "mapposix" (ie the SFM mapping) but the conversion to the new mount API in the 5.11 kernel broke the ability to override the default mapping of the reserved characters (like '?' and '*' and '\') via "mapchars" mount option. This patch fixes that - so can now mount with "mapchars" mount option to override the default ("mapposix" ie SFM) mapping. Reported-by: Tyler Spivey Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 9b92e2d0eb696d7586ba832c8854653b59887da0 Author: Gavrilov Ilia Date: Tue May 23 08:29:44 2023 +0000 ipv6: Fix out-of-bounds access in ipv6_find_tlv() commit 878ecb0897f4737a4c9401f3523fd49589025671 upstream. optlen is fetched without checking whether there is more than one byte to parse. It can lead to out-of-bounds access. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c61a40432509 ("[IPV6]: Find option offset by type.") Signed-off-by: Gavrilov Ilia Reviewed-by: Jiri Pirko Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit bf478c2643bac16aec1d9a7c116f83e34594440b Author: Will Deacon Date: Thu May 18 11:25:28 2023 +0100 bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields commit 0613d8ca9ab382caabe9ed2dceb429e9781e443f upstream. A narrow load from a 64-bit context field results in a 64-bit load followed potentially by a 64-bit right-shift and then a bitwise AND operation to extract the relevant data. In the case of a 32-bit access, an immediate mask of 0xffffffff is used to construct a 64-bit BPP_AND operation which then sign-extends the mask value and effectively acts as a glorified no-op. For example: 0: 61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0) results in the following code generation for a 64-bit field: ldr x7, [x7] // 64-bit load mov x10, #0xffffffffffffffff and x7, x7, x10 Fix the mask generation so that narrow loads always perform a 32-bit AND operation: ldr x7, [x7] // 64-bit load mov w10, #0xffffffff and w7, w7, w10 Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: John Fastabend Cc: Krzesimir Nowak Cc: Andrey Ignatov Acked-by: Yonghong Song Fixes: 31fd85816dbe ("bpf: permits narrower load from bpf program context fields") Signed-off-by: Will Deacon Link: https://lore.kernel.org/r/20230518102528.1341-1-will@kernel.org Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman commit 79081b3f489abf7dfb4a455b623a7af80aed1430 Author: Sunil Goutham Date: Thu May 18 12:10:42 2023 +0530 octeontx2-pf: Fix TSOv6 offload commit de678ca38861f2eb58814048076dcf95ed1b5bf9 upstream. HW adds segment size to the payload length in the IPv6 header. Fix payload length to just TCP header length instead of 'TCP header size + IPv6 header size'. Fixes: 86d7476078b8 ("octeontx2-pf: TCP segmentation offload support") Signed-off-by: Sunil Goutham Signed-off-by: Ratheesh Kannoth Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 114657365c8813c3357db20c5b89a79e5d1463f4 Author: Po-Hsu Lin Date: Thu May 18 12:37:59 2023 +0800 selftests: fib_tests: mute cleanup error message commit d226b1df361988f885c298737d6019c863a25f26 upstream. In the end of the test, there will be an error message induced by the `ip netns del ns1` command in cleanup() Tests passed: 201 Tests failed: 0 Cannot remove namespace file "/run/netns/ns1": No such file or directory This can even be reproduced with just `./fib_tests.sh -h` as we're calling cleanup() on exit. Redirect the error message to /dev/null to mute it. V2: Update commit message and fixes tag. V3: resubmit due to missing netdev ML in V2 Fixes: b60417a9f2b8 ("selftest: fib_tests: Always cleanup before exit") Signed-off-by: Po-Hsu Lin Reviewed-by: Ido Schimmel Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e06841a2abf9c82735cee39e88b1d79464088840 Author: Pratyush Yadav Date: Mon May 22 17:30:20 2023 +0200 net: fix skb leak in __skb_tstamp_tx() commit 8a02fb71d7192ff1a9a47c9d937624966c6e09af upstream. Commit 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with zerocopy skbs. But it ended up adding a leak of its own. When skb_orphan_frags_rx() fails, the function just returns, leaking the skb it just cloned. Free it before returning. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Fixes: 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.") Signed-off-by: Pratyush Yadav Reviewed-by: Kuniyuki Iwashima Reviewed-by: Willem de Bruijn Link: https://lore.kernel.org/r/20230522153020.32422-1-ptyadav@amazon.de Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 8f1512d78b5de928f4616a871e77b58fd546e651 Author: Ravulapati Vishnu Vardhan Rao Date: Thu May 11 16:55:32 2023 +0530 ASoC: lpass: Fix for KASAN use_after_free out of bounds commit 75e5fab7db0cecb6e16b22c34608f0b40a4c7cd1 upstream. When we run syzkaller we get below Out of Bounds error. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: BUG: KASAN: slab-out-of-bounds in regcache_flat_read+0x10c/0x110 Read of size 4 at addr ffffff8088fbf714 by task syz-executor.4/14144 CPU: 6 PID: 14144 Comm: syz-executor.4 Tainted: G W Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT) Call trace: dump_backtrace+0x0/0x4ec show_stack+0x34/0x50 dump_stack_lvl+0xdc/0x11c print_address_description+0x30/0x2d8 kasan_report+0x178/0x1e4 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf8/0x5a0 _regmap_read+0x45c/0x86c _regmap_update_bits+0x128/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_put_dec_enum+0x1d0/0x268 snd_ctl_elem_write+0x288/0x474 By Error checking and checking valid values issue gets rectifies. Signed-off-by: Ravulapati Vishnu Vardhan Rao commit b1bde4b4360c3d8a35504443efabd3243b802805 Author: Alan Stern Date: Mon Apr 10 15:40:05 2023 -0400 media: radio-shark: Add endpoint checks commit 76e31045ba030e94e72105c01b2e98f543d175ac upstream. The syzbot fuzzer was able to provoke a WARNING from the radio-shark2 driver: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 3271 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed2/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 3271 Comm: kworker/0:3 Not tainted 6.1.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed2/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 00 36 ea fb 48 8b 7c 24 18 e8 36 1c 02 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 b6 90 8a e8 9a 29 b8 03 <0f> 0b e9 58 f8 ff ff e8 d2 35 ea fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90003876dd0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff8880750b0040 RSI: ffffffff816152b8 RDI: fffff5200070edac RBP: ffff8880172d81e0 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffff8880285c5040 R14: 0000000000000002 R15: ffff888017158200 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe03235b90 CR3: 000000000bc8e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_bulk_msg+0x226/0x550 drivers/usb/core/message.c:387 shark_write_reg+0x1ff/0x2e0 drivers/media/radio/radio-shark2.c:88 ... The problem was caused by the fact that the driver does not check whether the endpoints it uses are actually present and have the appropriate types. This can be fixed by adding a simple check of these endpoints (and similarly for the radio-shark driver). Link: https://syzkaller.appspot.com/bug?extid=4b3f8190f6e13b3efd74 Reported-and-tested-by: syzbot+4b3f8190f6e13b3efd74@syzkaller.appspotmail.com Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/e2858ab4-4adf-46e5-bbf6-c56742034547@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman commit 43f569fd0699c4240a5c96e5ba1a0844a595afca Author: Alan Stern Date: Mon Apr 10 15:38:22 2023 -0400 USB: sisusbvga: Add endpoint checks commit df05a9b05e466a46725564528b277d0c570d0104 upstream. The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95 RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline] sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379 sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline] sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline] sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177 sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869 ... The problem was caused by the fact that the driver does not check whether the endpoints it uses are actually present and have the appropriate types. This can be fixed by adding a simple check of the endpoints. Link: https://syzkaller.appspot.com/bug?extid=23be03b56c5259385d79 Reported-and-tested-by: syzbot+23be03b56c5259385d79@syzkaller.appspotmail.com Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/48ef98f7-51ae-4f63-b8d3-0ef2004bb60a@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit da0f4b5576820204159f91e85e61898b9987a716 Author: Alan Stern Date: Mon Apr 10 15:37:07 2023 -0400 USB: core: Add routines for endpoint checks in old drivers commit 13890626501ffda22b18213ddaf7930473da5792 upstream. Many of the older USB drivers in the Linux USB stack were written based simply on a vendor's device specification. They use the endpoint information in the spec and assume these endpoints will always be present, with the properties listed, in any device matching the given vendor and product IDs. While that may have been true back then, with spoofing and fuzzing it is not true any more. More and more we are finding that those old drivers need to perform at least a minimum of checking before they try to use any endpoint other than ep0. To make this checking as simple as possible, we now add a couple of utility routines to the USB core. usb_check_bulk_endpoints() and usb_check_int_endpoints() take an interface pointer together with a list of endpoint addresses (numbers and directions). They check that the interface's current alternate setting includes endpoints with those addresses and that each of these endpoints has the right type: bulk or interrupt, respectively. Although we already have usb_find_common_endpoints() and related routines meant for a similar purpose, they are not well suited for this kind of checking. Those routines find endpoints of various kinds, but only one (either the first or the last) of each kind, and they don't verify that the endpoints' addresses agree with what the caller expects. In theory the new routines could be more general: They could take a particular altsetting as their argument instead of always using the interface's current altsetting. In practice I think this won't matter too much; multiple altsettings tend to be used for transferring media (audio or visual) over isochronous endpoints, not bulk or interrupt. Drivers for such devices will generally require more sophisticated checking than these simplistic routines provide. Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman commit 387bd0a3af3bdd2b16f8dbef0c9fcccac63000a4 Author: Kuniyuki Iwashima Date: Tue May 23 09:33:05 2023 -0700 udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated(). commit ad42a35bdfc6d3c0fc4cb4027d7b2757ce665665 upstream. syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe13cbaa ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbaddb52d ("udp: use it's own memory accounting schema") Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b Signed-off-by: Kuniyuki Iwashima Link: https://lore.kernel.org/r/20230523163305.66466-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit cf3b5cd7127cc10c5b12400c545f263f0e5e715c Author: Taehee Yoo Date: Wed May 17 14:30:10 2023 +0000 net: fix stack overflow when LRO is disabled for virtual interfaces commit ae9b15fbe63447bc1d3bba3769f409d17ca6fdf6 upstream. When the virtual interface's feature is updated, it synchronizes the updated feature for its own lower interface. This propagation logic should be worked as the iteration, not recursively. But it works recursively due to the netdev notification unexpectedly. This problem occurs when it disables LRO only for the team and bonding interface type. team0 | +------+------+-----+-----+ | | | | | team1 team2 team3 ... team200 If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE event to its own lower interfaces(team1 ~ team200). It is worked by netdev_sync_lower_features(). So, the NETDEV_FEAT_CHANGE notification logic of each lower interface work iteratively. But generated NETDEV_FEAT_CHANGE event is also sent to the upper interface too. upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own lower interfaces again. lower and upper interfaces receive this event and generate this event again and again. So, the stack overflow occurs. But it is not the infinite loop issue. Because the netdev_sync_lower_features() updates features before generating the NETDEV_FEAT_CHANGE event. Already synchronized lower interfaces skip notification logic. So, it is just the problem that iteration logic is changed to the recursive unexpectedly due to the notification mechanism. Reproducer: ip link add team0 type team ethtool -K team0 lro on for i in {1..200} do ip link add team$i master team0 type team ethtool -K team$i lro on done ethtool -K team0 lro off In order to fix it, the notifier_ctx member of bonding/team is introduced. Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack") Signed-off-by: Taehee Yoo Reviewed-by: Eric Dumazet Reviewed-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 9e12c58a5ece41be72157cef348576b135c9fc72 Author: Alan Stern Date: Fri May 19 15:32:30 2023 -0400 fbdev: udlfb: Fix endpoint check commit ed9de4ed39875706607fb08118a58344ae6c5f42 upstream. The syzbot fuzzer detected a problem in the udlfb driver, caused by an endpoint not having the expected type: usb 1-1: Read EDID byte 0 failed: -71 usb 1-1: Unable to get valid EDID from device/display ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111 dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743 The current approach for this issue failed to catch the problem because it only checks for the existence of a bulk-OUT endpoint; it doesn't check whether this endpoint is the one that the driver will actually use. We can fix the problem by instead checking that the endpoint used by the driver does exist and is bulk-OUT. Reported-and-tested-by: syzbot+0e22d63dcebb802b9bc8@syzkaller.appspotmail.com Signed-off-by: Alan Stern CC: Pavel Skripkin Fixes: aaf7dbe07385 ("video: fbdev: udlfb: properly check endpoint type") Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit aee97eec77029270866c704f66cdf2881cbd2fe1 Author: Tetsuo Handa Date: Thu May 11 22:47:32 2023 +0900 debugobjects: Don't wake up kswapd from fill_pool() commit eb799279fb1f9c63c520fe8c1c41cb9154252db6 upstream. syzbot is reporting a lockdep warning in fill_pool() because the allocation from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM) and therefore tries to wake up kswapd, which acquires kswapd_wait::lock. Since fill_pool() might be called with arbitrary locks held, fill_pool() should not assume that acquiring kswapd_wait::lock is safe. Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for !__GFP_DIRECT_RECLAIM allocation. Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects") Reported-by: syzbot Signed-off-by: Tetsuo Handa Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/6577e1fa-b6ee-f2be-2414-a2b51b1c5e30@I-love.SAKURA.ne.jp Closes: https://syzkaller.appspot.com/bug?extid=fe0c72f0ccbb93786380 Signed-off-by: Greg Kroah-Hartman commit c09a7b6190f5a5d8324c84b8e88f02e9861af735 Author: Zhang Rui Date: Thu Mar 23 09:56:40 2023 +0800 x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms commit edc0a2b5957652f4685ef3516f519f84807087db upstream. Traditionally, all CPUs in a system have identical numbers of SMT siblings. That changes with hybrid processors where some logical CPUs have a sibling and others have none. Today, the CPU boot code sets the global variable smp_num_siblings when every CPU thread is brought up. The last thread to boot will overwrite it with the number of siblings of *that* thread. That last thread to boot will "win". If the thread is a Pcore, smp_num_siblings == 2. If it is an Ecore, smp_num_siblings == 1. smp_num_siblings describes if the *system* supports SMT. It should specify the maximum number of SMT threads among all cores. Ensure that smp_num_siblings represents the system-wide maximum number of siblings by always increasing its value. Never allow it to decrease. On MeteorLake-P platform, this fixes a problem that the Ecore CPUs are not updated in any cpu sibling map because the system is treated as an UP system when probing Ecore CPUs. Below shows part of the CPU topology information before and after the fix, for both Pcore and Ecore CPU (cpu0 is Pcore, cpu 12 is Ecore). ... -/sys/devices/system/cpu/cpu0/topology/package_cpus:000fff -/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-11 +/sys/devices/system/cpu/cpu0/topology/package_cpus:3fffff +/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-21 ... -/sys/devices/system/cpu/cpu12/topology/package_cpus:001000 -/sys/devices/system/cpu/cpu12/topology/package_cpus_list:12 +/sys/devices/system/cpu/cpu12/topology/package_cpus:3fffff +/sys/devices/system/cpu/cpu12/topology/package_cpus_list:0-21 Notice that the "before" 'package_cpus_list' has only one CPU. This means that userspace tools like lscpu will see a little laptop like an 11-socket system: -Core(s) per socket: 1 -Socket(s): 11 +Core(s) per socket: 16 +Socket(s): 1 This is also expected to make the scheduler do rather wonky things too. [ dhansen: remove CPUID detail from changelog, add end user effects ] CC: stable@kernel.org Fixes: bbb65d2d365e ("x86: use cpuid vector 0xb when available for detecting cpu topology") Fixes: 95f3d39ccf7a ("x86/cpu/topology: Provide detect_extended_topology_early()") Suggested-by: Len Brown Signed-off-by: Zhang Rui Signed-off-by: Dave Hansen Acked-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/all/20230323015640.27906-1-rui.zhang%40intel.com Signed-off-by: Greg Kroah-Hartman commit a9ffd42eb9abe593c46ca8b66a251713cb901d26 Author: Kan Liang Date: Mon May 8 07:02:06 2023 -0700 perf/x86/uncore: Correct the number of CHAs on SPR commit 38776cc45eb7603df4735a0410f42cffff8e71a1 upstream. The number of CHAs from the discovery table on some SPR variants is incorrect, because of a firmware issue. An accurate number can be read from the MSR UNC_CBO_CONFIG. Fixes: 949b11381f81 ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support") Reported-by: Stephane Eranian Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Tested-by: Stephane Eranian Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230508140206.283708-1-kan.liang@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 277f206bb874e25fc65f2c27c3e033d5284539f8 Author: Helge Deller Date: Wed May 24 17:07:07 2023 +0200 parisc: Fix flush_dcache_page() for usage from irq context commit 61e150fb310729c98227a5edf6e4a3619edc3702 upstream. Since at least kernel 6.1, flush_dcache_page() is called with IRQs disabled, e.g. from aio_complete(). But the current implementation for flush_dcache_page() on parisc unintentionally re-enables IRQs, which may lead to deadlocks. Fix it by using xa_lock_irqsave() and xa_unlock_irqrestore() for the flush_dcache_mmap_*lock() macros instead. Cc: linux-parisc@vger.kernel.org Cc: stable@kernel.org # 5.18+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit eff115ca949a4a6244e2acbd4a14cd2dd6e7fa99 Author: Hardik Garg Date: Fri May 26 16:21:36 2023 -0700 selftests/memfd: Fix unknown type name build failure Partially backport v6.3 commit 11f75a01448f ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC") to fix an unknown type name build error. In some systems, the __u64 typedef is not present due to differences in system headers, causing compilation errors like this one: fuse_test.c:64:8: error: unknown type name '__u64' 64 | static __u64 mfd_assert_get_seals(int fd) This header includes the __u64 typedef which increases the likelihood of successful compilation on a wider variety of systems. Signed-off-by: Hardik Garg Reviewed-by: Tyler Hicks (Microsoft) Signed-off-by: Greg Kroah-Hartman commit 1a98b6e028eedc26445721a049231a8d8d34e146 Author: Dave Hansen Date: Tue May 16 12:24:25 2023 -0700 x86/mm: Avoid incomplete Global INVLPG flushes commit ce0b15d11ad837fbacc5356941712218e38a0a83 upstream. The INVLPG instruction is used to invalidate TLB entries for a specified virtual address. When PCIDs are enabled, INVLPG is supposed to invalidate TLB entries for the specified address for both the current PCID *and* Global entries. (Note: Only kernel mappings set Global=1.) Unfortunately, some INVLPG implementations can leave Global translations unflushed when PCIDs are enabled. As a workaround, never enable PCIDs on affected processors. I expect there to eventually be microcode mitigations to replace this software workaround. However, the exact version numbers where that will happen are not known today. Once the version numbers are set in stone, the processor list can be tweaked to only disable PCIDs on affected processors with affected microcode. Note: if anyone wants a quick fix that doesn't require patching, just stick 'nopcid' on your kernel command-line. Signed-off-by: Dave Hansen Reviewed-by: Thomas Gleixner Cc: stable@vger.kernel.org Signed-off-by: Daniel Sneddon Signed-off-by: Greg Kroah-Hartman commit 683bb30c69472edb84bb0d902f9d8c2d5aa68fe0 Author: Frank Li Date: Mon May 15 12:20:52 2023 -0400 dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type commit 50a1726b148ff30778cb8a6cf3736130b07c93fd upstream. In cdns3-gadget.c, 'cdns,on-chip-buff-size' was read using device_property_read_u16(). It resulted in 0 if a 32bit value was used in dts. This commit fixes the dt binding doc to declare it as u16. Cc: stable@vger.kernel.org Fixes: 68989fe1c39d ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema") Signed-off-by: Frank Li Reviewed-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman commit 647af8a998c2a345cc2ead7dc564da9dc25efc75 Author: Josef Bacik Date: Thu May 11 12:45:59 2023 -0400 btrfs: use nofs when cleaning up aborted transactions commit 597441b3436a43011f31ce71dc0a6c0bf5ce958a upstream. Our CI system caught a lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc7+ #1167 Not tainted ------------------------------------------------------ kswapd0/46 is trying to acquire lock: ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120 but task is already holding lock: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0xa5/0xe0 kmem_cache_alloc+0x31/0x2c0 alloc_extent_state+0x1d/0xd0 __clear_extent_bit+0x2e0/0x4f0 try_release_extent_mapping+0x216/0x280 btrfs_release_folio+0x2e/0x90 invalidate_inode_pages2_range+0x397/0x470 btrfs_cleanup_dirty_bgs+0x9e/0x210 btrfs_cleanup_one_transaction+0x22/0x760 btrfs_commit_transaction+0x3b7/0x13a0 create_subvol+0x59b/0x970 btrfs_mksubvol+0x435/0x4f0 __btrfs_ioctl_snap_create+0x11e/0x1b0 btrfs_ioctl_snap_create_v2+0xbf/0x140 btrfs_ioctl+0xa45/0x28f0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc -> #0 (sb_internal#2){++++}-{0:0}: __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 start_transaction+0x401/0x730 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 kthread+0xf0/0x120 ret_from_fork+0x29/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sb_internal#2); lock(fs_reclaim); lock(sb_internal#2); *** DEADLOCK *** 3 locks held by kswapd0/46: #0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 #1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290 #2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0 stack backtrace: CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack_lvl+0x58/0x90 check_noncircular+0xd6/0x100 ? save_trace+0x3f/0x310 ? add_lock_to_list+0x97/0x120 __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 start_transaction+0x401/0x730 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 ? lock_release+0x134/0x270 ? __pfx_wake_bit_function+0x10/0x10 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 ? __pfx_inode_lru_isolate+0x10/0x10 ? __pfx_inode_lru_isolate+0x10/0x10 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_kswapd+0x10/0x10 kthread+0xf0/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 This happens because when we abort the transaction in the transaction commit path we call invalidate_inode_pages2_range on our block group cache inodes (if we have space cache v1) and any delalloc inodes we may have. The plain invalidate_inode_pages2_range() call passes through GFP_KERNEL, which makes sense in most cases, but not here. Wrap these two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to make sure we don't end up with the fs reclaim dependency under the transaction dependency. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 7e93fe1d17337208e64fd3e5f6282354f6041bbd Author: Zev Weiss Date: Tue May 16 22:47:56 2023 -0700 gpio: mockup: Fix mode of debugfs files commit 0a1bb16e0fe6650c3841e611de374bfd5578ad70 upstream. This driver's debugfs files have had a read operation since commit 2a9e27408e12 ("gpio: mockup: rework debugfs interface"), but were still being created with write-only mode bits. Update them to indicate that the files can also be read. Signed-off-by: Zev Weiss Fixes: 2a9e27408e12 ("gpio: mockup: rework debugfs interface") Cc: stable@kernel.org # v5.1+ Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman commit 3a2d238c5a3a4c5543212564e34c221887bbb48d Author: Helge Deller Date: Mon May 22 22:57:30 2023 +0200 parisc: Allow to reboot machine after system halt commit 2028315cf59bb899a5ac7e87dc48ecb8fac7ac24 upstream. In case a machine can't power-off itself on system shutdown, allow the user to reboot it by pressing the RETURN key. Cc: # v4.14+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 96f8dd0483c8388bcd53e64614457064f782e74b Author: Helge Deller Date: Wed May 24 14:34:58 2023 +0200 parisc: Handle kgdb breakpoints only in kernel context commit 6888ff04e37d01295620a73f3f7efbc79f6ef152 upstream. The kernel kgdb break instructions should only be handled when running in kernel context. Cc: # v5.4+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 16deb7413ace8164e101c13c87d0a7962dabe53e Author: Finn Thain Date: Sat May 6 19:38:12 2023 +1000 m68k: Move signal frame following exception on 68020/030 commit b845b574f86dcb6a70dfa698aa87a237b0878d2a upstream. On 68030/020, an instruction such as, moveml %a2-%a3/%a5,%sp@- may cause a stack page fault during instruction execution (i.e. not at an instruction boundary) and produce a format 0xB exception frame. In this situation, the value of USP will be unreliable. If a signal is to be delivered following the exception, this USP value is used to calculate the location for a signal frame. This can result in a corrupted user stack. The corruption was detected in dash (actually in glibc) where it showed up as an intermittent "stack smashing detected" message and crash following signal delivery for SIGCHLD. It was hard to reproduce that failure because delivery of the signal raced with the page fault and because the kernel places an unpredictable gap of up to 7 bytes between the USP and the signal frame. A format 0xB exception frame can be produced by a bus error or an address error. The 68030 Users Manual says that address errors occur immediately upon detection during instruction prefetch. The instruction pipeline allows prefetch to overlap with other instructions, which means an address error can arise during the execution of a different instruction. So it seems likely that this patch may help in the address error case also. Reported-and-tested-by: Stan Johnson Link: https://lore.kernel.org/all/CAMuHMdW3yD22_ApemzW_6me3adq6A458u1_F0v-1EYwK_62jPA@mail.gmail.com/ Cc: Michael Schmitz Cc: Andreas Schwab Cc: stable@vger.kernel.org Co-developed-by: Michael Schmitz Signed-off-by: Michael Schmitz Signed-off-by: Finn Thain Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/9e66262a754fcba50208aa424188896cc52a1dd1.1683365892.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman commit 9be921854e983a81a0aeeae5febcd87093086e46 Author: Tudor Ambarus Date: Wed May 17 13:38:08 2023 +0000 net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize commit 7e01c7f7046efc2c7c192c3619db43292b98e997 upstream. Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev: ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. Fixes: 289507d3364f ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/ Signed-off-by: Tudor Ambarus Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 1f6ae24e3d5a567c2a9b82de61cafcaf47df2890 Author: Matthias Kaehlcke Date: Tue May 16 16:46:30 2023 +0000 ASoC: rt5682: Disable jack detection interrupt during suspend commit 8b271370e963370703819bd9795a54d658071bed upstream. The rt5682 driver switches its regmap to cache-only when the device suspends and back to regular mode on resume. When the jack detect interrupt fires rt5682_irq() schedules the jack detect work. This can result in invalid reads from the regmap in cache-only mode if the work runs before the device has resumed: [ 56.245502] rt5682 9-001a: ASoC: error at soc_component_read_no_lock on rt5682.9-001a for register: [0x000000f0] -16 Disable the jack detection interrupt during suspend and re-enable it on resume. The driver already schedules the jack detection work on resume, so any state change during suspend is still handled. This is essentially the same as commit f7d00a9be147 ("SoC: rt5682s: Disable jack detection interrupt during suspend") for the rt5682s. Cc: stable@kernel.org Signed-off-by: Matthias Kaehlcke commit 693acaa739dcde32828d4e92a11cbe3b4c1cef49 Author: Haibo Chen Date: Thu May 4 19:22:22 2023 +0800 mmc: sdhci-esdhc-imx: make "no-mmc-hs400" works commit 81dce1490e28439c3cd8a8650b862a712f3061ba upstream. After commit 1ed5c3b22fc7 ("mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus"), the property "no-mmc-hs400" from device tree file do not work any more. This patch reorder the code, which can avoid the warning message "drop HS400 support since no 8-bit bus" and also make the property "no-mmc-hs400" from dts file works. Fixes: 1ed5c3b22fc7 ("mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus") Signed-off-by: Haibo Chen Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230504112222.3599602-1-haibo.chen@nxp.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 7177586e06ff8a14dfffad5cb40a33f1b8a575a8 Author: Bin Li Date: Wed May 24 19:37:55 2023 +0800 ALSA: hda/realtek: Enable headset onLenovo M70/M90 commit 4ca110cab46561cd74a2acd9b447435acb4bec5f upstream. Lenovo M70/M90 Gen4 are equipped with ALC897, and they need ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work. The previous quirk for M70/M90 is for Gen3. Signed-off-by: Bin Li Cc: Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit e6a624451afbafb7f6779600aad243c185893c26 Author: Takashi Iwai Date: Thu May 18 13:35:20 2023 +0200 ALSA: hda: Fix unhandled register update during auto-suspend period commit 81302b1c7c997e8a56c1c2fc63a296ebeb0cd2d0 upstream. It's reported that the recording started right after the driver probe doesn't work properly, and it turned out that this is related with the codec auto-suspend. Namely, after the probe phase, the usage count goes zero, and the auto-suspend is programmed, but the codec is kept still active until the auto-suspend expiration. When an application (e.g. alsactl) updates the mixer values at this moment, the values are cached but not actually written. Then, starting arecord thereafter also results in the silence because of the missing unmute. The root cause is the handling of "lazy update" mode; when a mixer value is updated *after* the suspend, it should update only the cache and exits. At the resume, the cached value is written to the device, in turn. The problem is that the current code misinterprets the state of auto-suspend as if it were already suspended. Although we can add the check of the actual device state after pm_runtime_get_if_in_use() for catching the missing state, this won't suffice; the second call of regmap_update_bits_check() will skip writing the register because the cache has been already updated by the first call. So we'd need fixes in two different places. OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with pm_runtime_get_if_active() (with ign_usage_count=true). This change implies that the driver takes the pm refcount if the device is still in ACTIVE state and continues the processing. A small caveat is that this will leave the auto-suspend timer. But, since the timer callback itself checks the device state and aborts gracefully when it's active, this won't be any substantial problem. Long story short: we address the missing register-write problem just by replacing the pm_runtime_*() call in snd_hda_keep_power_up(). Fixes: fc4f000bf8c0 ("ALSA: hda - Fix unexpected resume through regmap code path") Reported-by: Amadeusz Sławiński Closes: https://lore.kernel.org/r/a7478636-af11-92ab-731c-9b13c582a70d@linux.intel.com Suggested-by: Cezary Rojewski Cc: Link: https://lore.kernel.org/r/20230518113520.15213-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 7716da3fa10bb93aadc75119b3d100176a5d092a Author: Adam Stylinski Date: Sun May 21 10:52:23 2023 -0400 ALSA: hda/ca0132: add quirk for EVGA X299 DARK commit 7843380d07bbeffd3ce6504e73cf61f840ae76ca upstream. This quirk is necessary for surround and other DSP effects to work with the onboard ca0132 based audio chipset for the EVGA X299 dark mainboard. Signed-off-by: Adam Stylinski Cc: Link: https://bugzilla.kernel.org/show_bug.cgi?id=67071 Link: https://lore.kernel.org/r/ZGopOe19T1QOwizS@eggsbenedict.adamsnet Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit c37eb46c613ae72aee42300f94a2973ffe54c736 Author: Peter Collingbourne Date: Thu Apr 20 14:09:45 2023 -0700 arm64: Also reset KASAN tag if page is not PG_mte_tagged commit 2efbafb91e12ff5a16cbafb0085e4c10c3fca493 upstream. Consider the following sequence of events: 1) A page in a PROT_READ|PROT_WRITE VMA is faulted. 2) Page migration allocates a page with the KASAN allocator, causing it to receive a non-match-all tag, and uses it to replace the page faulted in 1. 3) The program uses mprotect() to enable PROT_MTE on the page faulted in 1. As a result of step 3, we are left with a non-match-all tag for a page with tags accessible to userspace, which can lead to the same kind of tag check faults that commit e74a68468062 ("arm64: Reset KASAN tag in copy_highpage with HW tags only") intended to fix. The general invariant that we have for pages in a VMA with VM_MTE_ALLOWED is that they cannot have a non-match-all tag. As a result of step 2, the invariant is broken. This means that the fix in the referenced commit was incomplete and we also need to reset the tag for pages without PG_mte_tagged. Fixes: e5b8d9218951 ("arm64: mte: reset the page tag in page->flags") Cc: # 5.15 Link: https://linux-review.googlesource.com/id/I7409cdd41acbcb215c2a7417c1e50d37b875beff Signed-off-by: Peter Collingbourne Reviewed-by: Catalin Marinas Link: https://lore.kernel.org/r/20230420210945.2313627-1-pcc@google.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 291fe3d6f5dbafa6dd87a510c1351e8ce8a8a52e Author: Roberto Sassu Date: Tue Mar 14 09:17:16 2023 +0100 ocfs2: Switch to security_inode_init_security() commit de3004c874e740304cc4f4a83d6200acb511bbda upstream. In preparation for removing security_old_inode_init_security(), switch to security_inode_init_security(). Extend the existing ocfs2_initxattrs() to take the ocfs2_security_xattr_info structure from fs_info, and populate the name/value/len triple with the first xattr provided by LSMs. As fs_info was not used before, ocfs2_initxattrs() can now handle the case of replicating the behavior of security_old_inode_init_security(), i.e. just obtaining the xattr, in addition to setting all xattrs provided by LSMs. Supporting multiple xattrs is not currently supported where security_old_inode_init_security() was called (mknod, symlink), as it requires non-trivial changes that can be done at a later time. Like for reiserfs, even if EVM is invoked, it will not provide an xattr (if it is not the first to set it, its xattr will be discarded; if it is the first, it does not have xattrs to calculate the HMAC on). Finally, since security_inode_init_security(), unlike security_old_inode_init_security(), returns zero instead of -EOPNOTSUPP if no xattrs were provided by LSMs or if inodes are private, additionally check in ocfs2_init_security_get() if the xattr name is set. If not, act as if security_old_inode_init_security() returned -EOPNOTSUPP, and set si->enable to zero to notify to the functions following ocfs2_init_security_get() that no xattrs are available. Signed-off-by: Roberto Sassu Reviewed-by: Casey Schaufler Acked-by: Joseph Qi Reviewed-by: Mimi Zohar Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 4badd33929c05ed314794b95f1af1308f7222be8 Author: Christophe Leroy Date: Mon May 15 16:07:17 2023 +0200 spi: fsl-cpm: Use 16 bit mode for large transfers with even size (cherry picked from upstream fc96ec826bced75cc6b9c07a4ac44bbf651337ab) On CPM, the RISC core is a lot more efficiant when doing transfers in 16-bits chunks than in 8-bits chunks, but unfortunately the words need to be byte swapped as seen in a previous commit. So, for large tranfers with an even size, allocate a temporary tx buffer and byte-swap data before and after transfer. This change allows setting higher speed for transfer. For instance on an MPC 8xx (CPM1 comms RISC processor), the documentation tells that transfer in byte mode at 1 kbit/s uses 0.200% of CPM load at 25 MHz while a word transfer at the same speed uses 0.032% of CPM load. This means the speed can be 6 times higher in word mode for the same CPM load. For the time being, only do it on CPM1 as there must be a trade-off between the CPM load reduction and the CPU load required to byte swap the data. Signed-off-by: Christophe Leroy Link: https://lore.kernel.org/r/f2e981f20f92dd28983c3949702a09248c23845c.1680371809.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 28ffe8c8460364a9470fd015f14b21eec544956a Author: Christophe Leroy Date: Mon May 15 16:07:16 2023 +0200 spi: fsl-spi: Re-organise transfer bits_per_word adaptation (backported from upstream 8a5299a1278eadf1e08a598a5345c376206f171e) For different reasons, fsl-spi driver performs bits_per_word modifications for different reasons: - On CPU mode, to minimise amount of interrupts - On CPM/QE mode to work around controller byte order For CPU mode that's done in fsl_spi_prepare_message() while for CPM mode that's done in fsl_spi_setup_transfer(). Reunify all of it in fsl_spi_prepare_message(), and catch impossible cases early through master's bits_per_word_mask instead of returning EINVAL later. Signed-off-by: Christophe Leroy Link: https://lore.kernel.org/r/0ce96fe96e8b07cba0613e4097cfd94d09b8919a.1680371809.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 381e55bffe15e8d63d98e5c095a995c33c9bf55b Author: Olivier Moysan Date: Mon Jan 24 16:35:25 2022 +0100 ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15 commit ee2aacb6f3a901a95b1dd68964b69c92cdbbf213 upstream. Replace sai2a-2 node name by sai2a-sleep-2, to avoid name duplication. Fixes: 1a9a9d226f0f ("ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15") Signed-off-by: Olivier Moysan Signed-off-by: Alexandre Torgue Cc: Marek Vasut Signed-off-by: Greg Kroah-Hartman commit ca338fa8032a10e40ed005f84ed6c560dc7a1506 Author: Gregory Oakes Date: Thu Mar 16 15:13:12 2023 -0500 watchdog: sp5100_tco: Immediately trigger upon starting. commit 4eda19cc8a29cde3580ed73bf11dc73b4e757697 upstream. The watchdog countdown is supposed to begin when the device file is opened. Instead, it would begin countdown upon the first write to or close of the device file. Now, the ping operation is called within the start operation which ensures the countdown begins. From experimenation, it does not appear possible to do this with a single write including both the start bit and the trigger bit. So, it is done as two distinct writes. Signed-off-by: Gregory Oakes Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20230316201312.17538-1-gregory.oakes@amd.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Cc: Mario Limonciello Signed-off-by: Greg Kroah-Hartman commit 6312c7cc07f397e0d11a1b1a7ca713a5711f9489 Author: Michal Simek Date: Fri May 12 13:52:04 2023 +0200 dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries [ Upstream commit a7844528722619d2f97740ae5ec747afff18c4be ] Current only one entry is enabled but IP itself is using 4 different IDs which are already listed in zynqmp.dtsi. sata: ahci@fd0c0000 { compatible = "ceva,ahci-1v84"; ... iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, <&smmu 0x4c2>, <&smmu 0x4c3>; }; Fixes: 8ac47837f0e0 ("arm64: dts: zynqmp: Add missing iommu IDs") Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Michal Simek Acked-by: Krzysztof Kozlowski Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin commit 7ef9045fe7580cac85e81ae0192599a12345e4c2 Author: Piyush Mehta Date: Mon Jun 20 13:07:17 2022 +0530 dt-bindings: ata: ahci-ceva: convert to yaml [ Upstream commit f2fb1b50fbac4a0a462e1705ac913abf52aae906 ] Convert the ahci-ceva doc to yaml. Signed-off-by: Piyush Mehta Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220620073717.3079-1-piyush.mehta@xilinx.com Stable-dep-of: a78445287226 ("dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries") Signed-off-by: Sasha Levin commit f19171155305332c57ec3ee020996a31384d9bcd Author: Linyu Yuan Date: Fri May 12 08:45:24 2023 +0800 usb: dwc3: fix gadget mode suspend interrupt handler issue [ Upstream commit 4e8ef34e36f2839ef8c8da521ab7035956436818 ] When work in gadget mode, currently driver doesn't update software level link_state correctly as link state change event is not enabled for most devices, in function dwc3_gadget_suspend_interrupt(), it will only pass suspend event to UDC core when software level link state changes, so when interrupt generated in sequences of suspend -> reset -> conndone -> suspend, link state is not updated during reset and conndone, so second suspend interrupt event will not pass to UDC core. Remove link_state compare in dwc3_gadget_suspend_interrupt() and add a suspended flag to replace the compare function. Fixes: 799e9dc82968 ("usb: dwc3: gadget: conditionally disable Link State change events") Cc: stable Acked-by: Thinh Nguyen Signed-off-by: Linyu Yuan Link: https://lore.kernel.org/r/20230512004524.31950-1-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 7919af1dcb8eae143d8e787086e1ab4f2083e1fd Author: Elson Roy Serrao Date: Fri Mar 24 14:47:57 2023 -0700 usb: gadget: Properly configure the device for remote wakeup [ Upstream commit b93c2a68f3d9dc98ec30dcb342ae47c1c8d09d18 ] The wakeup bit in the bmAttributes field indicates whether the device is configured for remote wakeup. But this field should be allowed to set only if the UDC supports such wakeup mechanism. So configure this field based on UDC capability. Also inform the UDC whether the device is configured for remote wakeup by implementing a gadget op. Reviewed-by: Thinh Nguyen Signed-off-by: Elson Roy Serrao Link: https://lore.kernel.org/r/1679694482-16430-2-git-send-email-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 4e8ef34e36f2 ("usb: dwc3: fix gadget mode suspend interrupt handler issue") Signed-off-by: Sasha Levin